Cisco OL-4015-08 Bedienungsanleitung Seite 261

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 678
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 260
613
Cross-Platform Release Notes for Cisco IOS Release 12.0S
OL-1617-14 Rev. Q0
Caveats
Resolved Caveats—Cisco IOS Release 12.0(32)S4
class class-A
police rate 20000000 conform-action transmit exceed-action drop
! note that policing actions are configured on one line in this example
CSCsd84951
Symptoms: A VIP may experience a reset due to a bus error (CPU signal 10) after an interface flap.
Conditions: This symptom occurs under normal operation.
Workaround: There is no workaround.
CSCsd84974
Symptoms: Loss of most of the configuration of a single Multilink PPP or Multilink FR bundle on
an RPR+ or an SSO switchover except for the following commands:
multilink-group
ppp multilink
ppp chap
frame-relay multilink
frame-relay interface-dlci
frame-relay intf-type
frame-relay lmi-type
ip vrf forwarding
mpls traffic-eng tunnels
ip rsvp bandwidth
Conditions: The symptom has been observed upon associating hardware with a previously
configured multilink bundle (when adding the first link in the bundle), in a router which contains
many interface bundles. The symptom is exacerbated when QoS policies are configured. The
symptom has been seen when an RP switchover occurs shortly after the first link is added to one or
multiple bundles.
Workaround: Manually reapply the configuration to the bundle in question. The symptom should be
confined to one bundle only.
CSCsd93343
Symptoms: Serial interfaces associated with MFR bundles on CT3 SPA may not come back up in
service after a physical online removal and insertion.
Conditions: This symptom is observed on a Cisco 12000 series router that runs the gsr-p-mz image
of Cisco IOS Release 12.0(32)S2.
Workaround: Enter the microcode reload sip-601 slot command.
CSCsd94142
Symptoms: If a Cisco 12000 series Internet router is configured as a router in a large scale
configuration, sometimes one or more line cards can reload silently during switchback from default
standby PRP (now in active role) to default primary PRP (now in standby role).
Conditions: This problem is observed in Cisco IOS Release 12.0(32)S2 and later releases.
Workaround: There is no workaround. However, waiting until the CPU utilization has decreased to
below 50% will severely reduce the possibility of this problem occurring.
Seitenansicht 260
1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 677 678

Kommentare zu diesen Handbüchern

Keine Kommentare