Cisco 15310-MA Anleitung zur Fehlerbehebung PDF herunterladen (Seite 351)

4-43

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, Release 9.0

78-18394-01

Chapter 4 Error Messages

EID-6017 The destination of a {0} route cannot be a node IP address. A node IP address cannot be the destination

for a static route.

EID-6018 The destination of a {0} route cannot be the same as the subnet

used by the node.

Refer to the error message text.

EID-6019 The destination of a static route cannot be 255.255.255.255 The network address such as

255.255.255.255 is not valid. Enter a valid

address.

EID-6020 The destination of a static route cannot be the loopback network

(127.0.0.0/8).

Refer to the error message text.

EID-6021 The subnet mask length for a non default route must be between

8 and 32.

Length of subnet mask must be within the

specified range.

EID-6022 The subnet mask length for a default route must be 0. Refer to the error message text.

EID-6023 The destination of a {0} route cannot be an internal

network{1}.

The destination of a static route must not be

an internal network.

EID-6024 The destination of a {0} route cannot be a class D (224.0.0.0/4)

or class E (240.0.0.0/4) address.

The destination of a static route must not be

a class D or class E address.

EID-6025 The destination of a {0} route cannot be a class A broadcast

address (x.255.255.255/8).

The destination of a static route must not be

a class A broadcast address. It should be

(xxx.0.0.0).

EID-6026 The destination of a {0} route cannot be a class B broadcast

address (x.x.255.255/16).

The destination of a static route must not be

a class B broadcast address.

EID-6027 The destination of a {0} route cannot be a class C broadcast

address (x.x.x.255/24).

The destination of a static route must not be

a class C broadcast address.

EID-6028 The destination of a {0} route cannot be the subnet broadcast

address associated with a node IP address.

The destination of a static route must not be

a subnet broadcast address of a node IP.

EID-6029 The next hop of a static route cannot be the same as the

destination of the route or an internal network{0}.

Static route must have the default route as

the next hop, and not destination of the

route or internal network.

EID-6030 The next hop of a static default route must be the provisioned

default router.

The default route is selected for networks

that do not have a specific route.

EID-6031 No more static routes can be created. You have reached the maximum number of

static routes.

EID-6032 This static route already exists. Refer to the error message text.

EID-6033 A previous operation is still in progress. Another operation is in progress. You must

try after sometime.

EID-6035 The parent entity does not exist. Refer to the error message text.

EID-6036 The parent PPM entity does not exist. Create a parent entity for the PPM.

EID-6037 This equipment type is not supported. CTC does not support this equipment.

EID-6038 The PPM port is invalid. Refer to the error message text.

EID-6039 The card is part of a regeneration group. Select another card.

Table 4-1 Error Messages (continued)

Error/Warning

ID Error/Warning Message Description

1 2 ... 346 347 348 349 350 351 352 353 354 355 356 ... 379 380

Kommentare zu diesen Handbüchern

Keine Kommentare