Cisco Explorer 4700 Installationsanleitung PDF herunterladen (Seite 516)

12-96

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 12 Configuring Traffic Policies

Configuring Actions Lists

Configuring SSL Header Insertion

Note The SSL Header Insertion feature does not apply to the ACE NPE software version (see the “Information

About the ACE No Payload Encryption Software Version” section on page 1-2).

You can configure an HTTP header modify action list that performs SSL header insertion.

When a client sends encrypted traffic to the ACE in an SSL termination configuration, the ACE

terminates the SSL traffic and then sends clear text to the server, which is unaware of the encrypted

traffic flowing between the client and the ACE. Using an action list associated with a Layer 7 HTTP

load-balancing policy map, you can instruct the ACE to perform SSL HTTP header insertion. The ACE

provides the server with the following SSL session information by inserting HTTP headers into the

HTTP requests that it receives over the connection:

• Session Parameters—SSL session parameters that the ACE and client negotiate during the SSL

handshake.

• Server Certificate Fields—Information regarding the SSL server certificate that resides on the ACE.

• Client Certificate Fields—Information regarding the SSL client certificate that the ACE retrieves

from the client when you configure the ACE to perform client authentication.

Note To prevent HTTP header spoofing, the ACE deletes any incoming HTTP headers that match one of the

headers that it is going to insert into the HTTP request.

By default, the ACE inserts the SSL header information into the first HTTP request only that it receives

over the connection. When the ACE and client need to renegotiate their connection, the ACE updates

the HTTP header information that it send to the server to reflect the new session parameters. You can

also instruct the ACE to insert the session information into every HTTP request that it receives over the

connection by creating an HTTP parameter map with either the Header Modify Per-Request or HTTP

Persistence Rebalance options enabled (see the “Configuring HTTP Parameter Maps” section on

page 8-2).

Note The maximum amount of data that the ACE can insert is 512 bytes. The ACE truncates the data if it

exceeds this limit.

Procedure

Step 1 Choose Config > Virtual Contexts > context > Expert > HTTP Header Modify Action Lists.

The HTTP Header Modify Action Lists table appears.

Step 2 In the HTTP Header Modify Action Lists table, do one of the following:

• To add a new action list, click Add. In the Action List Name field, enter a unique name for the action

list. Valid entries are unquoted text strings with a maximum of 64 alphanumeric characters. Click

Deploy Now when completed to save the configuration and display the editing tabs.

• To edit an existing action list, choose the action list and click Edit to display the editing tabs.

Step 3 Click the SSL Header Insert tab.

The SSL Header Insert table appears.

Step 4 In the SSL Header Insert table, click Add to add a new entry to the SSL Header Insert table.

1 2 ... 511 512 513 514 515 516 517 518 519 520 521 ... 647 648

Keine Kommentare

Cisco Explorer 4700 Installationsanleitung Seite 516