Cisco Explorer 4700 Installationsanleitung PDF herunterladen (Seite 158)

100

101

5-22

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 5 Configuring Virtual Servers

Configuring Virtual Servers

*New* 1. In the Name field, specify a unique name for this class map.

2. In the Match field, select the method to be used to evaluate multiple match statements when

multiple match conditions exist:

–

All—Indicates that a match exists only if all match conditions are satisfied.

–

Any—Indicates that a match exists if at least one of the match conditions is satisfied.

3. In the Conditions table, click Add to add a new set of conditions, or select an existing entry, and

then click Edit to modify it. The Type field appears.

4. In the Type field, select the type of condition that is to be met for protocol inspection and configure

protocol-specific criteria using the information in Table 5-6.

5. In the Action field, indicate the action that the virtual server is to perform on the traffic if it

matches the specified match criteria:

–

Permit—Indicates that the specified traffic is to be received by the virtual server if it meets

the specified deep inspection match criteria.

–

Reset—Indicates that the specified traffic is to be denied by the virtual server, which then

sends a TCP reset message to the client or server to close the connection.

*Inline Match*

1. In the Conditions Type field, select the type of inline match condition that is to be met for protocol

inspection.

Table 5-6 describes the types of conditions and their related configuration options.

2. Provide condition-specific criteria using the information in Table 5-6.

3. In the Action field, indicate the action that the virtual server is to perform on the traffic if it

matches the specified match criteria:

–

Permit—Indicates that the specified traffic is to be received by the virtual server if it meets

the specified deep inspection match criteria.

–

Reset—Indicates that the specified traffic is to be denied by the virtual server, which then

sends a TCP reset message to the client or server to close the connection.

Table 5-5 Protocol Inspection Match Criteria Configuration (continued)

Selection Action

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 647 648

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Explorer 4700 Installationsanleitung Seite 158

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Cisco Explorer 4700