Cisco Explorer 4700 Installationsanleitung PDF herunterladen (Seite 263)

100

101

6-61

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 6 Configuring Real Servers and Server Farms

Configuring Health Monitoring

To configure the SNMP OID for SNMP probes, see Configuring an OID for SNMP Probes, page 6-68.

TCP Probe Attributes

Note Click More Settings to access the additional attributes for the TCP probe type. By default, ACE

appliance Device Manager hides the probe attributes with default values and the probe attributes which

are not commonly used.

Table 6-27 SNMP Probe Attributes

Field Action

SNMP Community Enter the SNMP community string. Valid entries are unquoted text strings

with no spaces and a maximum of 255 characters.

More Settings

Port Enter the port number that the probe is to use. By default, the probe uses port

inheritance to determine the port number. For more information, see the

general attribute Port field description.

SNMP Version Select the SNMP version for this probe:

• N/A—No version is selected.

• SNMPv1—This probe is to use SNMP version 1.

• SNMPv2c—This probe is to use SNMP version 2c.

Table 6-28 TCP Probe Attributes

Field Action

Port Enter the port number that the probe is to use. By default, the probe uses port

inheritance to determine the port number. For more information, see the

general attribute Port field description.

Send Data Enter the ASCII data that the probe is to send to the server. Valid entries are

unquoted text strings with no spaces and a maximum of 255 characters.

Send Hex Data Enter the data in hex format to be sent as part of probe request. The Hex data

entered must be of even numbers and must be a single string consisting of

alphanumeric within the range of 0-9,a-f or A-F, and a maximum of 254

characters. The conversion from Hex ASCII to Binary will happen when the

probe data is sent out.

Data Format Users can enter only one data format either in “send-hex-data” or

in“send-data” format. Click the radio button “send-hex-data” or “send-data”

to choose the format. Expect Regex / Expect Hex Regex and Expect Regex

Offset / Expect Hex Regex Offset shall be displayed based on the radio

button selection.

More Settings

TCP Connection

Termination

Check box that when checked, configures the ACE to terminate TCP

connections gracefully by sending a FIN to the server. Uncheck the check

box to configure the ACE to terminate a TCP connection by sending an RST.

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 647 648

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Explorer 4700 Installationsanleitung Seite 263

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Cisco Explorer 4700