Cisco Explorer 4700 Installationsanleitung Seite 363

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 648
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 362
10-3
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 10 Configuring Network Access
Configuring Port Channel Interfaces
Configuring a Port-Channel Interface
You can group physical ports together on the ACE to form a logical Layer 2 interface called the
port-channel. All the ports belonging to the same port-channel must be configured with same values; for
example, port parameters, VLAN membership, and trunk configuration. Only one port-channel in a
channel group is allowed, and a physical port can belong to only to a single port-channel interface.
Step 1 Choose Config > Virtual Contexts > context > Network > Port Channel Interfaces. The Port Channel
Interfaces table appears.
Step 2 Click Add to add a port channel interface, or select an existing port channel interface, and then click
Edit to modify it.
Note If you click Edit, not all of the fields can be modified.
Step 3 Enter the port channel interface attributes (see Table 10-1).
Table 10-1 Port Channel Interface Attributes
Field Description
Interface Number Specify a channel number for the port-channel interface, which can be
from 1 to 255.
Description Enter a brief description for this interface.
Fault Tolerance VLAN Specify the fault tolerant (FT) VLAN used for communication between
the members of the FT group
Admin Status Indicate whether you want the interface to be Up or Down.
Load Balancing Method Specify one of the following load balancing methods:
Dst-IP—Loads distribution on the destination IP address.
Dst-MAC—Loads distribution on the destination MAC address.
Dst-Port—Loads distribution on the destination TCP or UDP port.
Src-Dst-IP—Loads distribution on the source or destination IP
address.
Src-Dst-MAC—Loads distribution on the source or destination
MAC address.
Src-Dst-Port—Loads distribution on the source or destination port.
Src-IP—Loads distribution on the source IP address.
Src-MAC—Loads distribution on the source MAC address.
Src-Port—Loads distribution on the TCP or UDP source port.
Seitenansicht 362
1 2 ... 358 359 360 361 362 363 364 365 366 367 368 ... 647 648

Kommentare zu diesen Handbüchern

Keine Kommentare