Cisco Explorer 4700 Installationsanleitung PDF herunterladen (Seite 431)

100

101

12-11

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 12 Configuring Traffic Policies

Setting Match Conditions for Class Maps

Setting Match Conditions for Layer 3/Layer 4 Network Traffic Class Maps

Use this procedure to specify the match criteria for a Layer 3/Layer 4 network traffic class map on the

ACE appliance.

Assumption

You have configured a Layer 3/Layer 4 class map and want to establish match conditions.

Procedure

Step 1 Choose Config > Virtual Contexts > context > Expert > Class Maps. The Class Maps table appears.

Step 2 In the Class Maps table, select the Layer 3/4 network traffic class map you want to set match conditions

for. You can select multiple class maps (hold down the Shift key while selecting entries) and apply

common match conditions to them.

Step 3 In the Match Condition table, click Add to add match criteria, or select the match condition you want to

modify, and then click Edit. The Match Condition configuration screen appears.

Step 4 In the Sequence Number field, enter an integer from 2 to 255.

Step 5 In the Match Condition Type field, select the type of match condition to be used for this class map and

configure any match-specific attributes as described in Table 12-5.

Server Load Balancing - Generic Setting Match Conditions for Generic Server Load Balancing

Class Maps, page 12-19

Server Load Balancing - RADIUS Setting Match Conditions for RADIUS Server Load Balancing

Class Maps, page 12-20

Server Load Balancing - RTSP Setting Match Conditions for RTSP Server Load Balancing

Class Maps, page 12-21

Server Load Balancing - SIP Setting Match Conditions for SIP Server Load Balancing Class

Maps, page 12-23

Table 12-4 Class Maps and Match Conditions (continued)

Class Map Related Topic

Table 12-5 Layer 3/Layer 4 Network Traffic Class Map Match Condition Attributes

Match Condition Type Description

Access List Indicates that an access list is the match type for this match condition.

In the Extended ACL field, select the ACL to use as the match condition.

Any Indicates that any Layer 3 or Layer 4 traffic passing through the ACE appliance meets the match

condition.

Anyv6 This option appears for Device Manager software Version A5(1.2) and later only. Any Layer 3 or

Layer 4 IPv6 traffic passing through the ACE meets the match condition.

1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 647 648

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Explorer 4700 Installationsanleitung Seite 431

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Cisco Explorer 4700