Cisco Explorer 4700 Installationsanleitung PDF herunterladen (Seite 44)

3-8

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 3 Using DM Guided Setup

Using Virtual Context Setup

Perform the following tasks to create or modify a resource class:

a. If you want to create a resource class, click Add (+). The New Resource Class configuration window

appears. Enter the resource information as described in the “Managing Resource Classes” section

on page 4-35.

b. If you want to modify an existing resource, choose the resource class that you want to modify, and

then click Edit. The Edit Resource Class configuration window appears. Enter the resource

information as described in the “Managing Resource Classes” section on page 4-35.

c. Click OK to save your entries and to return to the Resource Classes table.

Make note of the resource class that you want to use because you will need it in Step 5.

Step 4 Click Virtual Context Management under Virtual Context Setup.

The Virtual Context window appears (Config > Guided Setup > Virtual Context Setup > Virtual

Context Management).

Perform the following actions to create or modify a virtual context:

a. If you want to create a virtual context, click Add (+). The New Virtual Context window appears.

Configure the virtual context as described in the “Configuring Virtual Contexts” section on

page 4-7.

b. If you want to modify an existing virtual context, choose the virtual context that you want to modify

and click Edit. The Primary Attributes configuration screen appears. Enter the primary attributes

for this virtual context as described in the “Configuring Virtual Context Primary Attributes” section

on page 4-11.

Step 5 When completed, click Deploy Now to deploy this configuration on the ACE and save your entries to

the running-configuration and startup-configuration files. Follow these guidelines when creating or

modifying the virtual context:

• To connect the virtual context to the available VLANs, specify one or more VLANs in the Allocated

VLANs field. You can specify multiple VLAN values and ranges (for example, “10, 14, 70-79”).

• For virtual contexts configured for an ACE, you must set up all VLANs used in this step as trunk or

access VLANs on the port channel or Gigabit Ethernet interfaces. If you did not set up these VLANs

during the ACE Hardware Setup task, you can return to the ACE Hardware Setup window to

configure the required VLANs. See the “Using ACE Hardware Setup” section on page 3-3.

• When specifying the resource class for the virtual context, choose the resource class that you created

or specified in Step 3.

Note If you are unsure of the resource class to use for this virtual context, choose default. You

can change the resource class setting at a later time.

• If HA has been correctly configured for this ACE device, the High Availability check box will be

checked. If the check box is unchecked, check it to instruct DM to automatically configure

synchronization for this virtual context.

Note The High Availability check box is available only if HA Peering has previously been

completed for the ACE hardware.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 647 648

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Explorer 4700 Installationsanleitung Seite 44

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Cisco Explorer 4700