Cisco ONS 15327 Spezifikationen Seite 103

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 334
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 102
3-53
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.23 ED-EC1: Edit Electrical Carrier
(Cisco ONS 15454 only)
This command edits the attributes of an EC1.
Note This command is not allowed if the card is a protecting card.
Input Format ED-DS1:[<TID>]:<AID>:<CTAG>[:::TACC=<TACC>];
where:
<AID> is the access identifier of a DS1 layer entity on the DS3XM card and is
from the “DS1” section on page 4-10
<TACC> defines the DS1 as a test access port with a selected unique TAP
number. The TAP number ranges from 0–999. When TACC is 0, the TAP is
deleted. <TACC> is an integer.
Input Example ED-DS1:PETALUMA:DS1-2-6-12:123:::TACC=8;
Errors This message generates all the default errors
Section ED-DS1 Description (continued)
Section ED-EC1 Description
Category Ports
Security Provisioning
Related
Messages
ED-<OCN_TYPE> RTRV-<OCN_TYPE>
ED-DS1 RTRV-DS1
ED-G1000 RTRV-EC1
ED-T1 RTRV-G1000
ED-T3 RTRV-T1
RMV-<MOD_PORT> RTRV-T3
RST-<MOD_PORT>
Input Format ED-EC1:[<TID>]:<AID>:<CTAG>:::[PJMON=<PJMON>,][LBO=<LBO>]
[:<PST>];
where:
<AID> is the facility AID of an EC1 port and is from the “FACILITY” section
on page 4-11
<PJMON> is the SONET pointer number (0 or 1) of an EC1 port and is an
integer
Valid values for <LBO> are shown in the “E_LBO” section on page 4-36
<PST> is the state of an EC1 port; valid values for <PST> are shown in the
“PST” section on page 4-53
Example Input
ED-EC1:CISCO:FAC-1-1:123:::PJMON=0,LBO=0-225:IS;
Errors This message generates all the default errors
Seitenansicht 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 333 334

Kommentare zu diesen Handbüchern

Keine Kommentare