3-57
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.27 ED-NE-GEN: Edit Network Element GEN
This command edits the general node attributes of the NE.
Notes:
1. Only the IPADDR, IPMASK, DEFRTR and node name can be modified with this command.
2. The node name can be a maximum of 20 characters. If the entered name exceeds 20 characters, an
IPNV (Node Name Too Long) error message is returned.
3. The feature of setting a timing source has been supported since ONS 15454 R3.2.
4. An existing timing source can be removed by setting the address to 0.0.0.0.
Section ED-NE-GEN Description
Category System
Security Superuser
Related
Messages
ALW-MSG-ALL RTRV-INV
ED-DAT RTRV-NE-GEN
ED-NE-SYNCN RTRV-NE-IPMAP
INH-MSG-ALL RTRV-NE-SYNCN
INIT-SYS RTRV-TOD
RTRV-HDR SET-TOD
Input Format ED-NE-GEN:[<TID>]::<CTAG>:::[NAME=<NAME>,][IPADDR=<IPADDR>,]
[IPMASK=<IPMASK>,][DEFRTR=<DEFRTR>,][NTP=<NTP>];
where:
• <NAME> indicates the node name and is a string
• <IPADDR> indicates the node IP address and is a string
• <IPMASK> indicates the node IP mask and is a string
• <DEFRTR> indicates the node default router and is a string
• <NTP> indicates the NTP timing source address of the node and is a string
Input Example ED-NE-GEN:CISCO::123:::NAME=NODENAME,IPADDR=192.168.100.52,
IPMASK=255.255.255.0,DEFRTR=192.168.100.1,NTP=192.168.100.52;
Errors This message generates all the default errors
Kommentare zu diesen Handbüchern