3-128
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.90 RTRV-BITS: Retrieve Building Integrated Timing Supply
This command retrieves the BITS configuration command.
Section RTRV-BITS Description
Category Synchronization
Security Retrieve
Related
Messages
ED-BITS RLS-SYNCNSW
ED-NE-SYNCN RTRV-ALM-BITS
ED-SYNCN RTRV-ALM-SYNCN
OPR-SYNCNSW RTRV-COND-BITS
REPT ALM BITS RTRV-COND-SYNCN
REPT ALM SYNCN RTRV-NE-SYNCN
REPT EVT BITS RTRV-SYNCN
REPT EVT SYNCN
Input Format RTRV-BITS:[<TID>]:<AID>:<CTAG>[::::];
where:
• <AID> is the bit access identifier from the “BITS” section on page 4-9 and must
not be null
Input Example RTRV-BITS:SONOMA:BITS-1:782;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>::[LINECDE=<LINECDE>,][FMT=<FMT>,][LBO=<LBO>,]
[SYNCMSG=<SYNCMSG>,][AISTHRSHLD=<AISTHRSHLD>]:[<PST>]”
;
where:
• <AID> is an access identifier from the “BITS” section on page 4-9
• <LINECDE> is a line code; valid values for <LINECDE> are shown in the
“LINE_CODE” section on page 4-42, <LINECDE> is optional
• <FMT> is a frame format; valid values for <FMT> are shown in the
“FRAME_FORMAT” section on page 4-41, <FMT> is optional
• <LBO> indicates BITS line build-out; valid values for <LBO> are shown in the
“BITS_LineBuildOut” section on page 4-22, <LBO> is optional
• <SYNCMSG> indicates a sync messaging; <SYNCMSG> defaults to (Y) and
valid values are shown in the “ON_OFF” section on page 4-51, <SYNCMSG> is
optional
• <AIRTHRSHLD> is the AIS threshold. Valid values for <AIRTHRSHLD> are
shown in the “SYNC_CLOCK_REF_QUALITY_LEVEL” section on page 4-60;
<AIRTHRSHLD> is optional
• <PST> is the state; valid values for <PST> are shown in the “PST” section on
page 4-53, <PST> is optional
Kommentare zu diesen Handbüchern