3-170
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.119 RTRV-TH-<MOD2>: Retrieve Threshold (DS1, EC1, OC3, OC12, OC48,
OC192, STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C, STS192C, T1, T3,
VT1)
(DS1, EC1, OC192, STS192C supported for ONS 15454 only)
This command retrieves the threshold level of one or more monitored parameters.
Section RTRV-TH-<MOD2> Description
Category Performance
Security Retrieve
Related
Messages
INIT-REG-<MOD2>
RTRV-PM-<MOD2>
RTRV-PMMODE-<STS_PATH>
SET-PMMODE-<STS_PATH>
SET-TH-<MOD2>
Input Format RTRV-TH-<MOD2>:[<TID>]:<AID>:<CTAG>::[<MONTYPE>],
[<LOCN>],[<TMPER>];
where:
• <AID> is the access identifier from the “ALL” section on page 4-5 and must not
be null
• <MONTYPE> is the monitored type and defaults to CVL; valid values for
<MONTYPE> are shown in the “ALL_MONTYPE” section on page 4-19. A
null value is equivalent to ALL.
Note <MONTYPE> defaults to: CVL for OCN, EC1and DSN, ESP for STSp,
UASV for VT1, AISSP for DS1 layer of DS3XM. LOCN defaults to NEND.
TMPER defaults to 15 minutes.
• <LOCN> is the location; valid values for <LOCN> are shown in the
“LOCATION” section on page 4-42. A null value is equivalent to ALL.
• <TMPER> indicates the accumulation time period for the PM information; valid
values for <TMPER> are shown in the “TMPER” section on page 4-63. A null
value is equivalent to ALL.
Input Example RTRV-TH-T3:CISCO:FAC-1-3:1234::CVL,NEND,15-MIN;
Kommentare zu diesen Handbüchern