3-152
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Output Format SID DATE TIME
M CTAG COMPLD
“<WORK>,<PROTECT>::[PROTID=<PROTID>,][RVRTV=<RVRTV>,]
[RVTM=<RVTM>,][PSDIRN=<PSDIRN>]”
;
where:
• <WORK> identifies the working port and is the AID from the “FACILITY”
section on page 4-11
• <PROTECT> identifies the protection port and is the AID from the
“FACILITY” section on page 4-11
• <PROTID> is the protection group identifier (protection group name). It
defaults to the protecting port of the protection group; <PROTID> is a string, it
is optional and can have a maximum length of 32 characters
• <RVRTV> identifies the revertive mode and defaults to N (non-revertive mode);
valid values for <RVRTV> are shown in the “ON_OFF” section on page 4-51,
<RVRTV> is optional
• <RVTM> identifies the revertive time and defaults to 5.0 minutes; valid values
for <RVTM> are shown in the “REVERTIVE_TIME” section on page 4-55,
<RVTM> is optional
• <PSDIRN> indicates the switch mode and defaults to UNI. valid values for
<PSDIRN> are shown in the “UNI_BI” section on page 4-64, <PSDIRN> is
optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-2-1,FAC-1-1::PROTID=PROT_NAME,RVRTV=Y,RVTM=1.0,
PSDIRN=BI”
;
Errors This message generates all the default errors
Section RTRV-FFP-<OCN_TYPE> Description (continued)
Kommentare zu diesen Handbüchern