set clock
4025561 Rev
129
set clock
Syntax
set clock "mm/dd/yyyy hh:mm:ss"
Description
The set clock command lets you set and confirm the ICIM2 real time clock (RTC)
using a single command.
Note:
You must enclose the new date/time value in quotes.
Use this command carefully. Systems that use an external clock reference may
periodically overwrite settings made with this command. Make date, time, and
timezone changes to the master clock reference, if one is used.
Parameters
The date parameter, mm/dd/yyyy, defines:
The current month as one or two digits.
The current day as one or two digits.
The current year as four digits.
The time parameter, hh:mm:ss, defines:
The current hour as two digits in 24-hour format.
The current minute as two digits.
The current second as two digits.
Access Rights Required
Admin
Example
In the following example, note that the system responds by confirming the current
date and time settings. This avoids the need to issue a separate show clock
confirmation command.
ICIM> set clock "10/5/2005 12:40:00"
Wed, 05 Oct 2005 12:40:00 EST
Kommentare zu diesen Handbüchern