Cisco GoQAM Technical Information PDF herunterladen (Seite 151)

set

4025561 Rev

127

set

Syntax

set valueName newValue

Description

The set command allows a single parameter value to be set in the ICIM2 by

specifying the parameter to be changed and the new value.

Parameters

The valueName parameter can be one of the following:

valueName Description

CLLI Common Language Locator ID code for the ICIM2 (up to

20 characters, no spaces).

CLOCK Date and Time as maintained by the ICIM2.

COMMREAD SNMP Read Community string (default prismaread).

COMMTRAP SNMP Trap Community string (default prismatrap).

COMMWRITE SNMP Write Community string (default prismawrite).

GATEWAY IP address of the TCP/IP gateway, for packet routing (of

the form 172.24.28.254).

IP TCP/IP address of the ICIM2 (of the form 172.24.25.151).

LOCKOUT Change the User Lockout interval (1-60 minutes; 0 to

disable).

STATUSMSGCLEARKEY Controls whether Error or Status message is kept or

cleared.

SUBNET Subnet mask (of the form 255.255.0.0).

THRESHOLD User failed login attempts threshold.

TIMEOUT User inactivity timeout in minutes.

TZONE Time zone of the ICIM2 (see note below).

UPDATEID Write-only; value of 1 causes ICIM2 to re-read ID of all

modules.

The newValue parameter is the new parameter value to be set.

Note:

 Some of these values (IP and GATEWAY, for example) result in changes to the

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 307 308

Keine Kommentare

Cisco GoQAM Technical Information Seite 151