Cisco ISE - Line Card ISE Bedienungsanleitung PDF herunterladen (Seite 7)

Cisco IOSSoftware Configurationforthe Cisco12000Series One-PortChannelized OC-12/STM-4(DS1/E1)ISE Line

How to Configure Layer 1 Features

Cisco IOS Release 12.0(27)S1

Restrictions

The 1-Port CHOC-12 ISE line card can be installed only in the Cisco 12000 Series Router. The hardware

and software configuration procedures and tasks are similar to all other Cisco 12000 Series Router line

cards.

Each 1-Port CHOC-12 ISE line card requires 512 interface description blocks (IDBs) describing the DS1

channels (one per DS1 channel). We recommend that you install no more than two 1-Port CHOC-12 ISE

line cards on a Cisco 12000 Series Router chassis.

Configuring the SONET Controller

Summary Steps

1. enable

2. configure terminal

3. controller sonet slot/port

4. framing {sonet | sdh}

5. clock source {internal | line}

6. description string

7. report {all | event}

8. threshold type value

9. overhead s1s0 number

10. overhead c2 number

11. overhead j1 length [16 | 64]

12. overhead j1 message

Table 1 lists the SONET controller default values.

Table 1 Controller Parameters and Default Conﬁguration Values

Parameter Configuration Command Default Value

AIS shut—send LAIS when shut down [no] ais-shut on

APS—modify APS parameters [no] aps ... off

Clock source—specify the clock source

for the SONET port

[no] clock source [internal | line] line

Loopback—put the SONET port in

loopback

[no] loopback [internal | line] no loopback

Overhead—configure SONET overhead

flags

[no] overhead [j0 | s1s0] j1=1; s1s0=00

Report—enable reporting of selected

alarms

[no] report [all | b1-tca | b2-tca |

slos]

sf-ber, slos, slof,

b1-tca, lais,

b2-tca,

1 2 3 4 5 6 7 8 9 10 11 12 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco ISE - Line Card ISE Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco ISE - Line Card ISE