Cisco ISE - Line Card ISE Bedienungsanleitung PDF herunterladen (Seite 51)

Cisco IOSSoftware Configurationforthe Cisco12000Series One-PortChannelized OC-12/STM-4(DS1/E1)ISE Line

Verifying and Monitoring Configurations with Show Commands

Cisco IOS Release 12.0(27)S1

The show controllers sonet slot/port brief command shows limited information for a SONET port.

Router# show controllers sonet 2/0 brief

SONET 2/0 is up. (Configured for Locally Looped) Hardware is GSR 1 port ISE OC12

(channelized)

Applique type is Channelized OCx interface

Clock Source is Line, AUG mapping is AU4.

Medium info:

Type: SDH, Line Coding: NRZ, Line Type: Short SM

Regenerator Section:

LOF = 0 LOS = 0 BIP(B1) = 0

Multiplex Section:

AIS = 0 RDI = 0 REI = 0 BIP(B2) = 0

Active Defects: None

Active Alarms: None

Alarm reporting enabled for: SF SLOS SLOF B1-TCA B2-TCA B3-TCA

BER thresholds: SF = 10e-3 SD = 10e-6

TCA thresholds: B1 = 10e-6 B2 = 10e-6 B3 = 10e-6

High Order Path:

PATH 1:

AIS = 0 RDI = 0 REI = 15 BIP(B3) = 11

LOP = 0 PSE = 4 NSE = 0 NEWPTR = 1

LOM = 0 PLM = 0 UNEQ = 0

Active Defects: None

S1S0 = 02, C2 = 02

PATH TRACE BUFFER : STABLE

CRC-7: 0xF2 OK

52 6F 75 74 65 72 33 2F 30 2F 31 00 00 00 00 Router3/0/1....

STM1.AU4 3/0.1 is up. Hardware is GSR 1 port ISE OC12 (channelized)

Applique type is C12 in TUG-3 in AU-4

AU-4 1, TUG-3 1, TUG-2 1, E1 1 (C-12 1/1/1/1) is up

timeslots: 1-31

No alarms detected.

Framing is crc4, Clock Source is Internal

BERT test result (running)

Test Pattern : 2^15, Status : Sync, Sync Detected : 1

Interval : 5 minute(s), Time Remain : 2 minute(s)

Bit Errors (since BERT started): 0 bits,

Bits Received (since BERT started): 311 Mbits

Bit Errors (since last sync): 0 bits

Bits Received (since last sync): 311 Mbits

AU-4 1, TUG-3 1, TUG-2 1, E1 2 (C-12 1/1/1/2) is up

timeslots: 1-31

No alarms detected.

Framing is crc4, Clock Source is Internal

AU-4 1, TUG-3 1, TUG-2 1, E1 3 (C-12 1/1/1/3) is up

timeslots: 1-31

No alarms detected.

Framing is crc4, Clock Source is Internal

AU-4 1, TUG-3 1, TUG-2 2, E1 1 (C-12 1/1/2/1) is up

timeslots: 1-31

No alarms detected.

Framing is crc4, Clock Source is Internal

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco ISE - Line Card ISE Bedienungsanleitung Seite 51

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco ISE - Line Card ISE