Cisco ISE - Line Card ISE Bedienungsanleitung PDF herunterladen (Seite 6)

Cisco IOS SoftwareConfiguration for theCisco 12000 SeriesOne-Port Channelized OC-12/STM-4(DS1/E1) ISE Line

Layer 3 Software Feature Descriptions

Cisco IOS Release 12.0(27)S1

Multilink Frame Relay

Compliant with the Multilink Frame Relay UNI/NNI Implementation Agreement (FRF. 16), the1-Port

CHOC-12 ISE line card supports the following features:

• Up to 8 DS1s per multilink bundle

• Bundle members limited to a single line card

• Links in the bundle must have equal DS1 bandwidth

• Maximum of 4 DLCIs per multilink bundle

• Layer 2 Virtual Private Networks (VPNs) and Tunnel Services

Layer 3 Software Feature Descriptions

The 1-Port CHOC-12 ISE line card layer 3 software features are a subset of Cisco IOS 12.0(27)S1 and

Cisco IOS 12.0(26)S. These features are described or referenced in the document, Cross-Platform

Release Notes for Cisco IOS Release 12.0 S, Part 2: New Features and Important Notes at the following

URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/relnote/xprn120s/120snewf.htm

How to Configure Layer 1 Features

The following sections provides the following configuration procedures for the 1-Port CHOC-12 ISE

line card:

• Configuring the SONET Controller, page 7

• Configuring an STS-1 Mode of Operation with SONET Framing, page 12

• Configuring T3 Links with SONET Framing, page 13

• Configuring T1 Lines Under SDH Framing, page 24

• Configuring Attributes Under SDH Framing, page 22

• Configuring T1 Lines Under SONET Framing, page 14

• Configuring E1 Lines under SDH Framing with AU-4 AUG Mapping, page 31

• Using clear Commands on Serial Interfaces, page 38

• Verifying and Monitoring Configurations with Show Commands, page 44

1 2 3 4 5 6 7 8 9 10 11 ... 57 58

Keine Kommentare

Cisco ISE - Line Card ISE Bedienungsanleitung Seite 6