Cisco ISE - Line Card ISE Bedienungsanleitung PDF herunterladen (Seite 54)

Cisco IOS SoftwareConfiguration for theCisco 12000 SeriesOne-Port Channelized OC-12/STM-4(DS1/E1) ISE Line

Verifying and Monitoring Configurations with Show Commands

Cisco IOS Release 12.0(27)S1

Discovering the Operational Status of Line Protocols on All Interfaces—show protocols

The show protocols EXEC command displays the protocols configured for the entire system and specific

interfaces. If necessary, return to configuration mode to add or remove protocol routing on the system or

specific interfaces.

Router# show protocols

Global values:

Internet Protocol routing is enabled

Serial2/0.1/1/1/1:0 is up, line protocol is up

Serial2/0.1/1/2/1:0 is up, line protocol is up

Serial2/0.1/1/3/1:0 is up, line protocol is up

Serial2/0.1/3/7/1:0 is up, line protocol is up

Serial2/0.1/3/1/2:0 is up, line protocol is up

Serial2/0.1/3/7/3:0 is up, line protocol is up

POS5/0 is up, line protocol is down

Internet address is 12.3.2.2/24

Multilink1 is up, line protocol is up

Internet address is 12.1.1.2/24

Multilink2 is up, line protocol is up

Internet address is 12.1.2.2/24

Multilink3 is up, line protocol is up

Internet address is 12.1.3.2/24

Multilink7 is up, line protocol is up

Internet address is 12.1.7.2/24

Ethernet0 is up, line protocol is up

Internet address is 1.2.14.2/16

Router#

Discovering Multilink Bundle and Group Status—show ppp multilink

Use the show ppp multilink command to display information about the newly created multilink bundle:

Router# show ppp multilink

Multilink37, bundle name is group37

Bundle is Distributed

0 lost fragments, 0 reordered, 0 unassigned

0 discarded, 0 lost received

0x0 received sequence, 0x0 sent sequence

Member links: 2 active, 0 inactive (max not set, min not set)

Serial2/0.1/3/6/3:0

Serial2/0.1/3/7/3:0

Multilink31, bundle name is group31

Bundle is Distributed

0 lost fragments, 0 reordered, 0 unassigned

0 discarded, 0 lost received

0x0 received sequence, 0x0 sent sequence

Member links: 2 active, 0 inactive (max not set, min not set)

Serial2/1.1/3/6/2:0

Serial2/1.1/3/7/2:0

Multilink34, bundle name is group34

Bundle is Distributed

1 2 ... 49 50 51 52 53 54 55 56 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco ISE - Line Card ISE Bedienungsanleitung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco ISE - Line Card ISE