Maintaining the Cisco 2524 and Cisco 2525 Routers A-5
Opening the Chassis
Figure A-2 Chassis Cover Removal
Step 4 Remove the single screw located on the bottom of the chassis (on the side closest
to you). Note that the chassis is comprised of two sections: top and bottom.
Step 5 If required, insert a medium-size flat-blade screwdriver into the slots shown in
Figure A-2, Part A, and gently rotate the blade so that the top and bottom sections
separate slightly.
Step 6 Holding the chassis with both hands, position it as shown in Figure A-2, Part B.
Step 7 Pull the top section away from the bottom section. (See Figure A-2, Part B.) The
fit is very snug, so it may be necessary to pry the chassis sections apart at one end
and then the other until they separate.
SERIES
Slot
H3556
Screw Slot
A
Flat-blade screwdriver
H3557
FrontRear
Left end
toward you
B
Top section
Bottom section
Kommentare zu diesen Handbüchern