Cisco ASR 1001 Installationsanleitung PDF herunterladen (Seite 8)

11-324

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Cisco ASR 1001 Router Description

The following figures show the front panel of the Cisco ASR 1001 Router with the various IDCs.

Figure 11-6 shows the LEDs that are common to all configurations of the Cisco ASR 1001 Router.

Figure 11-6 Common LEDs for Cisco ASR 1001 Route Processor

Note For detailed descriptions of the SPAs on which some of the IDCs are based, go to:

http://www.cisco.com/en/US/products/ps6267/products_data_sheets_list.html

Note There are two field-replaceable units in the Cisco ASR 1001 chassis. They are the DIMMs and eUSB.

In order to service the components in the chassis, you must remove the power supplies and the chassis

cover. For instructions, see the “Removing and Replacing the Cisco ASR 1001 Router DIMM Memory

Modules” section on page 14-28 and the “Remove and Replace the eUSB Device on the Cisco ASR 1001

Router” section on page 14-42.

1 MAJ LED—major alarm indicator 6 BF—Internal bootflash LED indicates

activity of the EUSB device

2 CRIT LED—critical alarm indicator 7 MIN LED —minor alarm indicator

3 USB port— one USB high-speed (480Mbps)

port used for secure key storage, storing of

VPN credentials, or bulk flash storage for

image and configuration backup

8 STAT—status LED

4 USB LED 9 PWR—Power LED

5 LINK LED indicates MGMT Ethernet port

activity

— —

279787

ASR 1001

LINK

PWR

STAT

CRIT

MAJ

MIN

USB

2 3 4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Keine Kommentare

Cisco ASR 1001 Installationsanleitung Seite 8