Cisco ASR 1001 Installationsanleitung PDF herunterladen (Seite 27)

11-343

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Attaching a Chassis Ground Connection

Step 1 Align the cable-management bracket to the rack-mount bracket on one side of the Cisco ASR 1001

Router. The cable-management bracket aligns to the top hole of the chassis rack-mount bracket.

Step 2 Using a Phillips screwdriver, insert the screw through cable-management bracket and into the chassis

rack-mount and tighten the screw.

Note Use the package of screws that came with your chassis containing four screws.

Figure 11-18 shows where to attach the front rack-mount brackets to the Cisco ASR 1001 Router in a

rack.

Figure 11-18 Chassis Rack-Mount Bracket Ear Holes for the Cable-Management Bracket

Step 3

Using the bottom rack-mount ear hole, insert the screw through cable-management bracket and into the

chassis rack-mount (see Figure 11-18).

This completes the procedure for installing the cable-management brackets on the chassis.

Attaching a Chassis Ground Connection

Connecting the Cisco ASR 1000 Series Router to ground is required for all DC powered installations

and any AC powered installation where compliance with Telcordia grounding requirements is necessary.

Caution The dual-lug chassis stud must be installed, the SIP and SPA must be fully inserted and screwed in and

earthed to prevent a potential hazard in a telecom line.

Have the recommended tools and supplies available before you begin this procedure.

1 Secure the cable-management screw to the middle ear hole of the front rack-mount bracket on

both sides of the Cisco ASR 1001 Router.

279910

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Keine Kommentare

Cisco ASR 1001 Installationsanleitung Seite 27