Cisco ASR 1001 Installationsanleitung PDF herunterladen (Seite 37)

11-353

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Cisco ASR 1001 Router Power Supply Installation

Step 2 To remove the power cord from PS1, position the power supply cable in order to access the power supply

fasteners. Hold back the power supply cable in PS0, as shown in Figure 11-25, ensuring that you do not

unplug the power cable.

Figure 11-25 Positioning the AC Power Supply Cable in Slot PS0

Step 3 Continue to hold back the power supply cable in PS0, to gain access to the fastener. Unscrew both

fasteners on the power supply in slot 1.

Tip The Cisco ASR 1001 power supplies are long and narrow. It is recommended that when you pull the

power supply out of the chassis, you support the power supply from the bottom with the other hand.

Step 4 After the power supply fasteners are loosened, grasp the handle with one hand, support the weight of the

power supply with the other hand, and pull the power supply out of the slot. Figure 11-26 shows how to

remove the Cisco ASR 1001 Router AC power supply cables.

Figure 11-26 Removing the Cisco ASR 1001 Router AC Power Supply Cables

Step 5

Repeat these steps to remove the AC power supply from Slot PS0.

This completes the procedure of removing the AC power supply from the Cisco ASR 1001 Router.

207698

207699

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Keine Kommentare

Cisco ASR 1001 Installationsanleitung Seite 37