Cisco ASR 1001 Installationsanleitung PDF herunterladen (Seite 19)

11-335

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Mounting the Cisco ASR 1001 Router on an Equipment Shelf or Tabletop Installation

Step 3 Attach the front rack-mount brackets. Locate the threaded holes in the front sides of the chassis (first

holes beyond the vent holes) and use the package of black screws that shipped with the chassis.

Step 4 Align the front rack-mount bracket to one side of the chassis.

Step 5 Insert and tighten the screws on one side.

Step 6 Repeat Step 2 through Step 3 on the other side of the chassis. Use all screws to secure the rack-mount

brackets to the chassis.

Note The chassis rack-mount brackets must be installed first so that you can attach the

cable-management brackets to the chassis rack-mount brackets after the chassis is installed in

the rack.

Step 7 Gather the two cable-management brackets and screws shipped with your chassis. Figure 11-13 shows

cable-management brackets attached on the front of the Cisco ASR 1001 Router.

Note Make certain that the cable-management ‘U’ feature device has the open end pointing upwards

when you attach it to the chassis.

Figure 11-13 Attaching the Cable-Management Brackets to the Cisco ASR 1001 Router

Step 8 Screw the cable-management bracket to each side of the rack-mount brackets that are attached to the

chassis. Use two screws for each cable-management bracket. Use a screw from the package of four

screws.

Step 9 Check that all screws are securely tightened.

Step 10 Go to the “Attaching a Chassis Ground Connection” section on page 11-343 for instructions about

continuing the installation.

1 Cable-management bracket top and bottom

screws

3 Chassis front rack-mount bracket

2 Cable-management bracket — —

279910

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Keine Kommentare

Cisco ASR 1001 Installationsanleitung Seite 19