Cisco ISDN GW 3241 Bedienungsanleitung PDF herunterladen (Seite 36)

First steps

Customizing the auto attendant banner

You can add a custom banner image to any auto attendant configured on the MCU or IP VCR. The banner

is the image at the top of the auto attendant menu page and the default is the Codian company logo. The

image file must be in GIF or Windows BMP format with a maximum size of 352 x 64 pixels. If the image is

smaller than 352 x 64 pixels so that the background color is seen, you may also want to change the

background color.

Display the

Banner page for the auto attendant you want to alter and see the online help topic “Adding a

custom banner” for more information. To display the page:

 On the MCU go to Conferences > Auto attendants, select the auto attendant and click Banner

 On the IP VCR, go to Settings > Banner

Localized MCU units

If you prefer to work on a Codian MCU in a language other than English, Codian or a reseller can localize

your unit by uploading a localization package. The web interface pages, online help pages and voice

prompts will be displayed/played in your local language. The default files are not deleted and you can

return to English at any time. See the online help topic “Customization”: more information.

However, you can customize voice prompts yourself as described in the next section.

Customizing voice prompts (MCU and IP VCR)

By default the IP VCR and MCU includes English voice prompts spoken by a female American voice. You

may wish to replace these prompts with your own in order to change the wording, language or accent used.

Alternate prompts may be uploaded individually using the web interface (go to

Settings >

Customization). After the voice prompts have been uploaded you can create a resource package of them.

You can then upload the resource package on to other units in one go.

For detailed instructions and guidance on making good quality voice prompt recordings, display the online

help topic “Customizing the user interface”.

Communicating with the unit

To communicate with a unit you must have connected its ports and defined its IP address as described in the

Getting Started Guide.

There are a number of ways to communicate with Codian units:

 Serial port or console port - see the Getting Started Guide for your unit.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 82 83

Keine Kommentare

Cisco ISDN GW 3241 Bedienungsanleitung Seite 36