Cisco MC3810 Installationsanleitung PDF herunterladen (Seite 71)

show call history voice

Configuring Voice over IP for Cisco MC3810 Series Concentrators 71

Related Commands

RemoteIPAddress Remote system IP address for the call.

RemoteUDPPort Remote system UDP listener port to which voice packets for this call are

transmitted.

RoundTripDelay Voice packet round trip delay between the local and remote system on the IP

backbone for this call.

SelectedQoS Selected quality of service for the call.

SessionProtocol Session protocol to be used for an Internet call between the local and remote

router via the IP backbone.

SessionTarget Session target of the peer used for the call.

SetUpTime Value of the System UpTime when the call associated with this entry was

started.

TransmitBytes Number of bytes transmitted by this peer during the call.

TransmitPackets Number of packets transmitted by this peer during the call.

TxDuration Duration of the transmit path open from this peer to the voice gateway for the

call.

VADEnable Whether or not voice activation detection (VAD) was enabled for this call.

VoiceTxDuration Duration of voice transmitted from this peer to voice gateway for this call.

You can derivethe Voice Utilization Rate by dividing the VoiceTxDuration by

the TxDuration value.

Command Description

show call active voice Displays the contents of the active call table.

show dial-peer voice Displays conﬁguration information for dial peers.

show num-exp Displays the number expansions conﬁgured.

show voice port Displays conﬁguration information about a speciﬁc voice port.

Table 3 Show Call History Voice Field Descriptions (continued)

Field Description

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 77 78

Keine Kommentare

Cisco MC3810 Installationsanleitung Seite 71