Cisco MC3810 Installationsanleitung PDF herunterladen (Seite 56)

icpif

Release 12.0(7)XK

icpif

To specify the Impairment/Calculated Planning Impairment Factor (ICPIF) for calls sent by a dial

peer, use the icpif dial peer conﬁguration command. Use the no form of this command to restore the

default value for this command.

icpif number

no icpif number

Syntax Description

Default

The default value for this command is 30.

Command Mode

Dial-peer conﬁguration

Command History

Usage Guidelines

Usetheicpifcommandtospecify the maximum acceptable impairment factor for the voicecalls sent

by the selected dial peer.

This command is applicable only to VoIP peers.

Example

The following example disables the icpif command:

dial-peer voice 10 voip

icpif 0

number Integer, expressed in equipment impairment factor units, specifying the

ICPIF value. Valid entries are from 0 to 55.

Release Modiﬁcation

11.3(1)T This command was introduced on the Cisco 3600 series.

12.0(7)XK This command was ﬁrst supported on the Cisco MC3810 platform.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 77 78

Keine Kommentare

Cisco MC3810 Installationsanleitung Seite 56