Cisco Cisco Access Registrar 4.2 Spezifikationen PDF herunterladen (Seite 455)

100

101

10-13

Cisco Wireless LAN Controller Configuration Guide

OL-13826-01

Chapter 10 Configuring Radio Resource ManagementWireless Device Access

Enabling Rogue Access Point Detection

Figure 10-5 AP Authentication Policy Page

The name of the RF group to which this controller belongs appears at the top of the page.

Step 8 Choose AP Authentication from the Protection Type drop-down box to enable rogue access point

detection.

Step 9 Enter a number in the Alarm Trigger Threshold edit box to specify when a rogue access point alarm is

generated. An alarm occurs when the threshold value (which specifies the number of access point frames

with an invalid authentication IE) is met or exceeded within the detection period.

Note The valid threshold range is from1 to 255, and the default threshold value is 1. To avoid false

alarms, you may want to set the threshold to a higher value.

Step 10 Click Apply to commit your changes.

Step 11 Click Save Configuration to save your changes.

Step 12 Repeat this procedure on every controller in the RF group.

Note If rogue access point detection is not enabled on every controller in the RF group, the access

points on the controllers with this feature disabled are reported as rogues.

1 2 ... 450 451 452 453 454 455 456 457 458 459 460 ... 635 636

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Cisco Access Registrar 4.2 Spezifikationen Seite 455

Kommentare zu diesen Handbüchern