Cisco Cisco Access Registrar 4.2 Spezifikationen PDF herunterladen (Seite 323)

100

101

7-13

Cisco Wireless LAN Controller Configuration Guide

OL-13826-01

Chapter 7 Controlling Lightweight Access Points

Cisco Aironet 1510 Series Lightweight Outdoor Mesh Access Points

Figure 7-5 MAC Filters > New Page

Step 3

In the MAC Address field, enter the MAC address of the access point.

Step 4 From the Profile Name drop-down box, choose “Any WLAN.”

Step 5 In the Description field, enter a description of the access point. The text that you enter identifies the

access point on the controller. You may want to include an abbreviated name and the last few digits of

the MAC address, such as ap1510:62:39:10.

Step 6 From the Interface Name drop-down box, choose the controller interface to which the access point is to

connect.

Step 7 Click Apply to commit your changes. The access point now appears in the list of MAC filters on the

MAC Filtering page.

Step 8 Click Save Configuration to save your changes.

Step 9 Repeat this procedure to add the MAC addresses of additional access points to the list.

Using the CLI to Add the MAC Address of the Access Point to the Controller Filter List

Follow these steps to add a MAC filter entry for the access point on the controller using the controller

CLI.

Step 1 To add the MAC address of the access point to the controller filter list, enter this command:

config macfilter add ap_mac wlan_id interface [description]

A value of zero (0) for the wlan_id parameter specifies any WLAN, and a value of zero (0) for the

interface parameter specifies none. You can enter up to 32 characters for the optional description

parameter.

Step 2 To save your changes, enter this command:

save config

1 2 ... 318 319 320 321 322 323 324 325 326 327 328 ... 635 636

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Cisco Access Registrar 4.2 Spezifikationen Seite 323

Kommentare zu diesen Handbüchern