Cisco PIX 525 Spezifikationen PDF herunterladen (Seite 511)

100

101

32-3

Cisco Security Appliance Command Line Configuration Guide

OL-6721-01

Chapter 32 Monitoring and Troubleshooting

Monitoring the Security Appliance

Enabling SNMP

The SNMP agent that runs on the security appliance performs two functions:

• Replies to SNMP requests from NMSs.

• Sends traps (event notifications) to NMSs.

To enable the SNMP agent and identify an NMS that can connect to the security appliance, follow these

steps:

Step 1 To identify the IP address of the NMS that can connect to the security appliance, enter the following

command:

hostname(config)# snmp-server host

interface_name ip_address

[trap | poll] [community

text

] [version

] [udp-port

port

]

Specify trap or poll if you want to limit the NMS to receiving traps only or browsing (polling) only. By

default, the NMS can use both functions.

SNMP traps are sent on UDP port 162 by default. You can change the port number using the udp-port

keyword.

Step 2 To specify the community string, enter the following command:

hostname(config)# snmp-server community

key

The SNMP community string is a shared secret between the security appliance and the NMS. The key is

a case-sensitive value up to 32 characters in length. Spaces are not permitted.

Step 3 (Optional) To set the SNMP server location or contact information, enter the following command:

hostname(config)# snmp-server {contact | location}

text

Step 4 To enable the security appliance to send traps to the NMS, enter the following command:

hostname(config)# snmp-server enable [traps [all |

feature

[

trap1

] [

trap2

]] [...]]

Cisco Firewall MIB The security appliance supports browsing of the following groups:

• cfwSystem

The information is cfwSystem.cfwStatus, which relates to failover

status, pertains to the entire device and not just a single context.

Cisco Memory Pool MIB The security appliance supports browsing of the following table:

• ciscoMemoryPoolTable—The memory usage described in this table

applies only to the security appliance general-purpose processor, and

not to the network processors.

Cisco Process MIB The security appliance supports browsing of the following table:

• cpmCPUTotalTable

Cisco Syslog MIB The security appliance supports the following trap:

• clogMessageGenerated

You cannot browse this MIB.

Table 32-1 SNMP MIB and Trap Support (continued)

MIB or Trap Support Description

1 2 ... 506 507 508 509 510 511 512 513 514 515 516 ... 603 604

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco PIX 525 Spezifikationen Seite 511

Kommentare zu diesen Handbüchern