Cisco RSP7000 Bedienungsanleitung PDF herunterladen (Seite 9)

framing

PA-T3 and PA-2T3 Serial Port Adapters 9

framing

To specify T3 line framing used by the PA-T3 port adapter, use the framing interface configuration

command. To return to the default C-bit framing, use the no form of this command.

framing {c-bit | m13 | bypass}

no framing

Syntax Description

Default

C-bit framing

Command Mode

Interface configuration

Usage Guidelines

This command first appeared in Cisco IOS Release 11.1 CA.

When the framing mode is bypass, the T3 frame data is not included in the T3 frame, just the data.

If you use the bypass option, scrambling must be set to the default (disabled), the dsu mode must be

set to the default (0), and the dsu bandwidth must be set to the default (44736).

To verify the framing mode configured on the interface, use the show controllers serial EXEC

command.

Example

The following example sets the framing mode to bypass on interface 1/0/0:

interface serial 1/0/0

framing bypass

Related Command

show controllers serial

c-bit Specifies C-bit T3 framing. This is the default.

m13 Specifies m13 T3 framing.

bypass Specifies bypass T3 framing.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

Cisco RSP7000 Bedienungsanleitung Seite 9