Cisco RSP7000 Bedienungsanleitung PDF herunterladen (Seite 4)

Configuration Example

Release 11.1 CA

Configuration Example

The following example shows a typical configuration for serial interface 1/0/0 on a PA-T3 serial port

adapter in a Cisco 7500 series router. The dsu bandwidth command reduces the bandwidth by

padding the T3 frame, and the dsu mode command enables and improves interoperability with other

DSUs.

router# configure terminal

router(config)# interface serial 1/0/0

router(config-if)# ip address 1.1.1.10 255.255.255.0

router(config-if)# clock source internal

router(config-if)# crc 32

router(config-if)# dsu bandwidth 16000

router(config-if)# dsu mode 0

router(config-if)# no scramble

router(config-if)# framing c-bit

router(config-if)# no shutdown

router(config-if)# ^Z

Command Reference

This section documents new or modified commands. All other commands used with this feature are

documented in the Cisco IOS Release 11.1 command references.

• cablelength

• clock source

• dsu bandwidth

• dsu mode

• framing

• invert data

• loopback

• scramble

• show controllers cbus

• show controllers serial

• show diag

• show interfaces serial

Display protocols configured for the system and

specific interfaces.

show protocols

Display running configuration file. show running-config

Display configuration stored in NVRAM. show startup-config

Display specific port adapter information show diag slot

Task Command

1 2 3 4 5 6 7 8 9 ... 19 20

Keine Kommentare

Cisco RSP7000 Bedienungsanleitung Seite 4