Cisco RSP7000 Bedienungsanleitung PDF herunterladen (Seite 16)

Command Reference

Release 11.1 CA

show diag

To display hardware information for an interface, use the show diag privileged EXEC command on

Cisco 7500 series routers.

show diag [slot]

Syntax Description

Command Mode

Privileged EXEC

Usage Guidelines

This command first appeared in Cisco IOS Release 11.1.

This command was modified in Cisco IOS Release 11.1 CA to include sample output for the PA-T3

port adapter.

Use this command to determine the type of port adapter installed on a VIP2 in your router.

Sample Display

The following is sample output from the show diag command for a one-port T3 serial port adapter

in chassis slot 1:

router# show diag 1

Slot 1:

Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

VIP2 controller, HW rev 2.4, board revision D0

Serial number: 04372053 Part number: 73-1684-03

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible

EEPROM contents (hex):

0x20: 01 15 02 04 00 42 B6 55 49 06 94 03 00 00 00 00

0x30: 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Slot database information:

Flags: 0x4 Insertion time: 0x14A8 (5d02h ago)

Controller Memory Size: 16 MBytes DRAM, 1024 KBytes SRAM

PA Bay 0 Information:

T3 Serial PA, 1 ports

EEPROM format version 1

HW rev FF.FF, Board revision UNKNOWN

Serial number: 4294967295 Part number: 255-65535-255

slot (Optional) Slot number of the interface.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Cisco RSP7000 Bedienungsanleitung Seite 16