Cisco 678 Spezifikationen PDF herunterladen (Seite 97)

5-13

Cisco 600 Series Installation and Operation Guide

78-11190-01

Chapter 5 Configuration Procedures for the Cisco 67x CPE Devices

Configure the WAN Ports and ATM Virtual Connections

To set the maximum number of VCs, enter:

cbos# set interface wan0 maxvcs n

where

is between 1 and 8.

Table 5-2 shows the valid ranges for the VPI and VCI addresses.

Note

In CBOS version 2.3 or earlier, the VPI count is 1 to 4. In later

versions, the VPI count is 1 to 8.

Changing VPI Settings

Step 1

To make sure the wan0-0 connection remains closed during configuration, enter:

set interface wan0-0 disable

Step 2

To set the VPI number to 2, enter:

set interface wan0-0 vpi 2

Note

If you try to enter the command

set interface wan0-1

on a

connection that is already open, the system prompts you to

close that connection before you change the VPI setting.

Close the connection by entering

set interface wan0-1

Table 5-2 VPI/VCI Address Ranges

Maximum VCs VPI Range VCI Range

10-3 0-63

20-3 0-63

40-3 0-63

80-3 0-63

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 191 192

Keine Kommentare

Cisco 678 Spezifikationen Seite 97