Cisco 678 Spezifikationen PDF herunterladen (Seite 130)

Chapter 5 Configuration Procedures for the Cisco 67x CPE Devices

Update the CBOS Prompt

5-46

Cisco 600 Series Installation and Operation Guide

78-11190-01

Step 5

Enter:

set ppp wan0-0 ipcp 0.0.0.0

Step 6

Enter:

set ppp wan0-0 dns 0.0.0.0

Step 7

To enable NAT, enter:

set nat enable

Step 8

To enable the DHCP server, enter:

set dhcp server enable

Step 9

To save your changes, enter:

write

Step 10

To reboot the CPE, enter:

reboot

Update the CBOS Prompt

The default CBOS prompt is

cbos#

. You can change this prompt to a unique

subscriber identifier, as shown in the following example.

Step 1

Log on to CBOS using either the serial or Telnet interface. See the “Telnet”

section on page 5-24 for information on how to use Telnet to log on to the CBOS.

Step 2

To change the default prompt to c678, enter:

set prompt c678

Note

The prompt is limited to seven characters.

Step 3

The following prompt now appears:

c678#

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 191 192

Keine Kommentare

Cisco 678 Spezifikationen Seite 130