Cisco SIEMENS HICOM 330E Bedienungsanleitung PDF herunterladen (Seite 2)

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com

Page 2 of 73

Network Topology

Figure 1. Basic Call Network Topology

Limitations

B-Channel Mapping

Siemens Hicom 330E PBX uses sequential channel numbering (1-30) when QSIG protocol “PSS1V2” is selected, therefore the

Cisco 3745 Gateway configuration for Channel IE Type field should be set to Continuous Number.

Connected Name and Number Restrictions

Siemens phone displayed dialed number and trunk name when CCM sends Connected Name and Number as restricted.

Additional Network Feature Path Replacement for Call Diversion

Siemens Hicom 330E PBX does not send Path Replacement proposal for Call Diversion by forward switching.

MWI

1 2 3 4 5 6 7 ... 72 73

Keine Kommentare

Cisco SIEMENS HICOM 330E Bedienungsanleitung Seite 2