Cisco 3130 Spezifikationen Seite 93
- Seite / 107
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
2-63
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-06
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
auto qos voip
disabled, there is no concept of trusted or untrusted ports because the packets are not modified (the CoS,
DSCP, and IP precedence values in the packet are not changed). Traffic is switched in pass-through mode
(packets are switched without any rewrites and classified as best effort without any policing).
On a port on which the auto qos voip command is enabled, the queue-set ID that is generated depends
on the interface:
• For a Fast Ethernet interface, auto-QoS generates queue-set 1 (which is the default).
• For a Gigabit Ethernet interface, auto-QoS generates queue-set 2.
This is the enhanced configuration for the auto qos voip cisco-phone command:
Switch(config)# mls qos map policed-dscp 0 10 18 to 8
Switch(config)# mls qos map cos-dscp 0 8 16 24 32 46 48 56
Switch(config)# class-map match-all AUTOQOS_VOIP_DATA_CLASS
Switch(config-cmap)# match ip dscp ef
Switch(config)# class-map match-all AUTOQOS_DEFAULT_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-DEFAULT
Switch(config)# class-map match-all AUTOQOS_VOIP_SIGNAL_CLASS
Switch(config-cmap)# match ip dscp cs3
Switch(config)# policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
Switch(config-pmap)# class AUTOQOS_VOIP_DATA_CLASS
Switch(config-pmap-c)# set dscp ef
Switch(config-pmap-c)# police 128000 8000 exceed-action policed-dscp-transmit
Switch(config-pmap)# class AUTOQOS_VOIP_SIGNAL_CLASS
Switch(config-pmap-c)# set dscp cs3
Switch(config-pmap-c)# police 32000 8000 exceed-action policed-dscp-transmit
Switch(config-pmap)# class AUTOQOS_DEFAULT_CLASS
Switch(config-pmap-c)# set dscp default
Switch(config-pmap-c)# police 10000000 8000 exceed-action policed-dscp-transmit
Switch(config-if)# service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
This is the enhanced configuration for the auto qos voip cisco-softphone command:
Switch(config)# mls qos map policed-dscp 0 10 18 to 8
Switch(config)# mls qos map cos-dscp 0 8 16 24 32 46 48 56
Switch(config)# class-map match-all AUTOQOS_MULTIENHANCED_CONF_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-MULTIENHANCED-CONF
Switch(config)# class-map match-all AUTOQOS_VOIP_DATA_CLASS
Switch(config-cmap)# match ip dscp ef
Switch(config)# class-map match-all AUTOQOS_DEFAULT_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-DEFAULT
Switch(config)# class-map match-all AUTOQOS_TRANSACTION_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-TRANSACTIONAL-DATA
Switch(config)# class-map match-all AUTOQOS_VOIP_SIGNAL_CLASS
Switch(config-cmap)# match ip dscp cs3
Switch(config)# class-map match-all AUTOQOS_SIGNALING_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-SIGNALING
Switch(config)# class-map match-all AUTOQOS_BULK_DATA_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-BULK-DATA
Switch(config)# class-map match-all AUTOQOS_SCAVANGER_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-SCAVANGER
Switch(config)# policy-map AUTOQOS-SRND4-SOFTPHONE-POLICY
Switch(config-pmap)# class AUTOQOS_VOIP_DATA_CLASS
Switch(config-pmap-c)# set dscp ef
Switch(config-pmap-c)# police 128000 8000 exceed-action policed-dscp-transmit
Switch(config-pmap)# class AUTOQOS_VOIP_SIGNAL_CLASS
Switch(config-pmap-c)# set dscp cs3
Switch(config-pmap-c)# police 32000 8000 exceed-action policed-dscp-transmit
Switch(config-pmap)# class AUTOQOS_MULTIENHANCED_CONF_CLASS
Switch(config-pmap-c)# set dscp af41
Switch(config-pmap-c)# police 5000000 8000 exceed-action drop
- Text Part Number: OL-13271-06 1
- CONTENTS 3
- Contents 10
- OL-13271-06 10
- Audience 21
- Purpose 21
- Conventions 21
- Related Publications 22
- Accessing the Switch 25
- CLI Command Modes 26
- User EXEC Mode 27
- Privileged EXEC Mode 27
- Global Configuration Mode 28
- Interface Configuration Mode 28
- VLAN Configuration Mode 28
- Line Configuration Mode 29
- IOS Commands 31
- Switch# clear nmsp statistics 136
- Switch# clear vmps statistics 143
- Switch# clear vtp counters 144
- • module is always 0 148
- Transmission Control Protocol 152
- User Datagram Protocol 152
- The fragments 153
- • NTP authentication 255
- • NTP broadcast service 255
- • NTP access restrictions 255
- • match ip dscp dscp-list 372
- Switch(config)# mls qos 376
- OL-13270-06 480
- • IP address and network mask 492
- • The cable is open 513
- • The cable has a short 513
- Related Commands 536
- Command Description 537
- • Shutdown threshold 618
- • Drop threshold 618
- Conflict 715
- • 1000 Mb/s—4 740
- • 100 Mb/s—19 740
- • 10 Mb/s—100 740
- command to display an 742
- • 1000 Mb/s—20000 756
- • 100 Mb/s—200000 756
- • 10 Mb/s—2000000 756
- (nonrouting) port 828
- • Yellow—80°C 839
- • Red—85°C 839
- Switch(config)# udld enable 852
- Switch# vmps reconfirm 867
- Switch(config)# vmps retry 7 869
- Boot Loader Commands 881
- • d—directory 888
- • r—readable 888
- • w—writable 888
- • x—executable 888
- [-test 892
- Commands 911
- Platform Commands 1007
- APPENDIX 1055
Verwandte Produkte und Handbücher für Software Cisco 3130
Software Cisco WS-CBS3120X-S Spezifikationen
(100 Seiten)
(100 Seiten)
Software Cisco ROUTER-SDM-CD Betriebsanweisung
(40 Seiten)
(40 Seiten)
Software Cisco ME 3400 Spezifikationen
(872 Seiten)
(872 Seiten)
Software Cisco IE 2000 Spezifikationen
(336 Seiten)
(336 Seiten)
Software Cisco LRE CPE Spezifikationen
(648 Seiten)
(648 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.063 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern