Cisco 3130 Spezifikationen PDF herunterladen (Seite 62)

2-32

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference

OL-13271-06

Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands

authentication host-mode

Use the authentication host-mode interface configuration command to set the authorization manager

mode on a port.

authentication host-mode [multi-auth | multi-domain | multi-host | single-host]

no authentication host-mode [multi-auth | multi-domain | multi-host | single-host]]

Syntax Description

Defaults Single host mode is enabled.

Command Modes Interface configuration

Command History

Usage Guidelines Single-host mode should be configured if only one data host is connected. Do not connect a voice device

to authenticate on a single-host port. Voice device authorization fails if no voice VLAN is configured on

the port.

Multi-domain mode should be configured if data host is connected through an IP Phone to the port.

Multi-domain mode should be configured if the voice device needs to be authenticated.

Multi-auth mode should be configured to allow up to eight devices behind a hub to obtain secured port

access through individual authentication. Only one voice device can be authenticated in this mode if a

voice VLAN is configured.

Multi-host mode also offers port access for multiple hosts behind a hub, but multi-host mode gives

unrestricted port access to the devices after the first user gets authenticated.

Examples This example shows how to enable multiauth mode on a port:

Switch(config-if)# authentication host-mode multi-auth

This example shows how to enable multi-domain mode on a port:

Switch(config-if)# authentication host-mode multi-domain

This example shows how to enable multi-host mode on a port:

Switch(config-if)# authentication host-mode multi-host

multi-auth Enable multiple-authorization mode (multiauth mode) on the port.

multi-domain Enable multiple-domain mode on the port.

multi-host Enable multiple-host mode on the port.

single-host Enable single-host mode on the port.

Release Modification

12.2(50)SE This command was introduced.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 106 107

Keine Kommentare

Cisco 3130 Spezifikationen Seite 62