Cisco 2950 - Catalyst Switch Spezifikationen PDF herunterladen (Seite 510)

100

101

2-484

Catalyst 2950 and Catalyst 2955 Switch Command Reference

0L-10102-02

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

switchport access

• The software implements the VLAN Query Protocol (VQP) client, which can query a VMPS such

as a Catalyst 6000 series switch. The VMPS server must be configured before a port is configured

as dynamic.

• Use dynamic-access ports only to connect end stations. Connecting them to switches or routers that

use bridging protocols can cause a loss of connectivity.

• Configure the network so that Spanning Tree Protocol (STP) does not put the dynamic-access port

in an STP blocking state. The Port Fast feature is automatically enabled on dynamic-access ports.

• Dynamic-access ports can only be in one VLAN and do not use VLAN tagging.

• Dynamic-access ports cannot be configured as:

–

Members of an EtherChannel port group (dynamic-access ports cannot be grouped with any

other port, including other dynamic ports).

–

Source or destination ports in a static address entry.

–

Monitor ports.

Examples This example shows how to assign a port already in access mode to VLAN 2 (instead of the default

VLAN 1):

Switch(config-if)# switchport access vlan 2

You can verify your settings by entering the show interfaces interface-id switchport privileged EXEC

command and examining information in the Administrative Mode and Operational Mode rows.

Related Commands Command Description

show interfaces

switchport

Displays the administrative and operational status of a switching

(nonrouting) port, including port blocking and port protection settings.

switchport mode Configures the VLAN membership mode of a port.

1 2 ... 505 506 507 508 509 510 511 512 513 514 515 ... 673 674

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 2950 - Catalyst Switch Spezifikationen Seite 510

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Cisco 2950 - Catalyst Switch