Cisco 2950 - Catalyst Switch Spezifikationen PDF herunterladen (Seite 118)

100

101

2-92

Catalyst 2950 and Catalyst 2955 Switch Command Reference

OL-10102-02

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

dot1x control-direction

Use the dot1x control-direction command to change the port to unidirectional or bidirectional control.

dot1x control-direction {in | both}

no dot1x control-direction {in | both}

Syntax Description

Command Default The port is set to bidirectional mode.

Command Modes Interface configuration

Command History

Usage Guidelines Using the keyword both or using the no form of this command are the same command.

The keyword both and the no form of the command change the port to its bidirectional default setting.

Examples This example shows how to enable unidirectional control:

Switch(config-if)# dot1x control-direction in

These examples show how to enable bidirectional control:

Switch(config-if)# dot1x control-direction both

Switch(config-if)# no dot1x control-direction

You can verify your settings by entering the show dot1x all privileged EXEC command.

The show dot1x all privileged EXEC command output is the same for all switches except for the port

names and the state of the port. If a host is attached to the port but is not yet authenticated, a display

similar to this appears:

Supplicant MAC 0002.b39a.9275

AuthSM State = CONNECTING

BendSM State = IDLE

PortStatus = UNAUTHORIZED

dot1x control-direction in Enable unidirectional control on port.

dot1x control-direction both Enable bidirectional control on port.

Release Modification

12.1(22)EA6 This command was introduced.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 673 674

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 2950 - Catalyst Switch Spezifikationen Seite 118

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Cisco 2950 - Catalyst Switch