Cisco 6050 Betriebsanweisung PDF herunterladen (Seite 11)

McAfee® IntruShield® IPS 4.1 Overview

M-6050 Sensor Product Guide M-6050 physical description

dull-duplex Ethernet segments or eight 1 Gigabit SPAN ports transmitting aggregated

traffic.

Ports

The M-6050 is a 2RU unit and is equipped with the following components:

Figure 2: M-6050 sensor

Name Description

1 Management port

2 Console port

3 Auxiliary port

4 SFP Gigabit Ethernet Monitoring ports

5 XFP Gigabit Ethernet Monitoring ports

6 Response port

7 Fail-Open Control ports

8 External Compact Flash port

9 Power Supply A

10 Power Supply B

One RJ-45 10/100/1000 Management port, which is used for communication with the

Manager server. You can assign an IP address to this port during installation.

One RS-232C Console port, which is used to set up and configure the sensor.

One RS-232C Auxiliary port, which may be used to dial in remotely to set up and

configure the sensor.

Eight small form-factor pluggable (SFP) 1 Gigabit Monitoring ports, which enable you to

monitor eight SPAN ports, four full-duplex tapped segments, four segments in-

line, or a combination (that is, two full-duplex segment, four SPAN ports).

The Monitoring interfaces of the M-6050 work in stealth mode, meaning they

have no IP address and are not visible on the monitored segment.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 34 35

Keine Kommentare

Cisco 6050 Betriebsanweisung Seite 11