Cisco Router IOS XR Bedienungsanleitung PDF herunterladen (Seite 59)

Cisco IOS XR Training Page 59

interface GigabitEthernet0/3/0/2

address-family ipv4 unicast

address-family ipv6 unicast

end

Now, let us commit our changes.

RP/0/7/CPU0:R1(config-isis)#commit

RP/0/7/CPU0:R1(config-isis)#exit

RP/0/7/CPU0:R1(config)#exit

RP/0/7/CPU0:R1#

Time to check our IS-IS adjancies.

RP/0/7/CPU0:R1#sh isis adjacency

Thu Mar 29 22:16:21.989 UTC

IS-IS LAB Level-2 adjacencies:

System Id Interface SNPA State Hold Changed NSF IPv4 IPv6

BFD BFD

GSR-R2 Gi0/3/0/2 00d0.7901.3a78 Up 9 00:05:52 Yes None None

Total adjacency count: 1

RP/0/7/CPU0:R1#

We can see we are adjacent with R2 via IPv4 and IPv6. Lets look at the IPv4

IS-IS routing table and then PING the loopback of R2:

RP/0/7/CPU0:R1#sh route ipv4 isis

Thu Mar 29 22:17:15.545 UTC

i L2 2.2.2.2/32 [115/20] via 150.1.12.2, 00:06:36, GigabitEthernet0/3/0/2

RP/0/7/CPU0:R1#

RP/0/7/CPU0:R1#ping 2.2.2.2 so l0

Thu Mar 29 22:17:37.226 UTC

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

RP/0/7/CPU0:R1#

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 104 105

Keine Kommentare

Cisco Router IOS XR Bedienungsanleitung Seite 59