Cisco Router IOS XR Bedienungsanleitung PDF herunterladen (Seite 11)

Cisco IOS XR Training Page 11

Few other things that is nice to know.

You can configure the system in exclusive mode, this way only you can be

making changes and nobody else. To do this, just enter configure exclusive

RP/0/7/CPU0:R1#configure exclusive

You can add comments and notations to your commit that will show up in the

rollback.

RP/0/7/CPU0:R1#conf t

Sun Apr 1 22:32:23.941 UTC

RP/0/7/CPU0:R1(config)#int loop 667

RP/0/7/CPU0:R1(config-if)#ip add 6.6.6.7/32

RP/0/7/CPU0:R1(config-if)#exit

RP/0/7/CPU0:R1(config)#commit comment Created Loopback 667 For Testing

Sun Apr 1 22:33:34.589 UTC

RP/0/7/CPU0:R1(config)#

Now, if a comment has been added, you can see it via the show configuration

history last x detail command

RP/0/7/CPU0:R1#sh configuration history last 1 detail

Sun Apr 1 22:36:04.053 UTC

1) Event: commit Time: Sun Apr 1 22:33:36 2012

Commit ID: 1000000230 Label:

User: user Line: con0_7_CPU0

Client: CLI Comment: Created Loopback 667 For Testing

RP/0/7/CPU0:R1#

Ok, let’s quickly look at loading a configuration from the disk and

overwriting an existing configuration.

I have copied a config to disk0a: called newconfig.txt. What I want to do is

install this configuration as the running config on the router.

1626 -rwx 204 Wed Oct 17 01:21:30 2012 newconfig.txt

So to start, lets delete the existing configuration

RP/0/RSP0/CPU0:R1(config)#commit replace

Wed Oct 17 01:21:43.406 UTC

This commit will replace or remove the entire running configuration. This

operation can be service affecting.

Do you wish to proceed? [no]: y

RP/0/RSP0/CPU0:ios(config)#

RP/0/RSP0/CPU0:ios(config)#exit

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 104 105

Keine Kommentare

Cisco Router IOS XR Bedienungsanleitung Seite 11