Cisco Wide Area Application Engine 612 Bedienungsanleitung PDF herunterladen (Seite 11)

Interface Connectivity 85

To check the status of the standby interface, use the show interface Standby standby-

interface-number command. Example 4-7 shows the output of this command.

Each member of the standby group, as well as the status of the interface, is shown in the

output. The current active interface is also displayed. The output for each physical interface

is shown in Example 4-8.

Example 4-7 WAAS show interface Standby Interface Output

AST6-CCO-01# show interface Standby 1

Standby Group: 1

IP address: 10.88.80.130, netmask: 255.255.255.128

Member interfaces:

GigabitEthernet 1/0 priority: 105

GigabitEthernet 2/0 priority: 100

Active interface: GigabitEthernet 1/0

AST6-CCO-01#

Example 4-8 Standby Group Member Interface Output

AST6-CCO-01# show interface gigabitEthernet 1/0

Type:Ethernet

Ethernet address:00:11:25:AB:43:32

Internet address (secondary): 10.88.80.130 Netmask: 255.255.255.128

Maximum Transfer Unit Size:1500

Metric:1

Packets Received: 819025

Input Errors: 0

Input Packets Dropped: 0

Input Packets Overruns: 0

Input Packets Frames: 0

Packet Sent: 322492

Output Errors: 0

Output Packets Dropped: 0

Output Packets Overruns: 0

Output Packets Carrier: 0

Output Queue Length:1000

Collisions: 0

Base address:0x2000

Flags:UP BROADCAST RUNNING MULTICAST

Mode: full-duplex, 100baseTX

AST6-CCO-01#

AST6-CCO-01# show interface gigabitEthernet 2/0

Type:Ethernet

Ethernet address:00:11:25:AB:43:33

Maximum Transfer Unit Size:1500

Metric:1

Packets Received: 0

Input Errors: 0

Input Packets Dropped: 0

continues

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Wide Area Application Engine 612 Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco Wide Area Application Engine 612