
Polycom Unified Communications for Cisco Unified Communications Manager Environments
44 Polycom, Inc.
Configuring the Polycom Endpoint
Complete the following tasks on the Polycom endpoint:
• “Register the Polycom System with the Cisco Unified Communications
Manager” on page 44
• “Ensure the TIP Protocol is Enabled” on page 46
Task 1: Register the Polycom System with the Cisco Unified
Communications Manager
When an Polycom endpoint is registered with a Cisco Unified
Communications Manager, the endpoint can make calls to Cisco endpoints
that are also registered to the Cisco Unified Communications Manager.
To register an HDX or ITP system with the Cisco Unified Communications
Manager
1 Open a browser window and in the Address field enter the Polycom
HDX system IP address or host name.
2 Go to Admin Settings > Network > IP Network and select SIP.
3 Configure the settings in the SIP Settings section of the IP Network
screen. For guidance, see Table 3-3.
Kommentare zu diesen Handbüchern