
Using a Standalone Cisco IOS Gatekeeper
Polycom, Inc. 103
Configuring Cisco Unified Communications Manager for H.323
You need to configure Cisco Unified Communications Manager so that it can
send to and receive calls from the H.323 network.
You need to define a gatekeeper, create an H.323 trunk and establish the call
routing infrastructure.
For more information, see the Cisco documentation,
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products
_support_series_home.html.
Task 1: Define a gatekeeper
You need to define a gatekeeper for Cisco Unified Communications Manager
in order to integrate with H.323 endpoints.
These steps assume you are using Cisco Unified Communications Manager
8.x. Most versions of Cisco Unified Communications Manager require roughly
the same steps.
To define a gatekeeper:
1 Navigate to Device > Gatekeeper.
2 Click Add New.
3 Enter the IP Address of the gatekeeper that this Cisco Unified
Communications Manager needs to use and its description then click
Save.
4 Once entered, click Reset Gatekeeper, then Reset.
Note
This section assumes you are familiar with several critical Cisco Unified
Communications Manager concepts such as Calling Search Space, Location, and
Device pool. Be sure that in your environment, you know the proper settings for
these fields as they will determine how your devices (in particular the UVA devices)
connect to the H.323 network.
Kommentare zu diesen Handbüchern