
Using a Standalone Cisco IOS Gatekeeper
Polycom, Inc. 109
9 Enter the IP Address of the gatekeeper.
10 Exit the screen.
To configure using the HDX system web interface:
1 Browse to the IP address of the Polycom HDX system.
2 Click Admin settings.
3 Click Network.
4 Click IP Network.
Enter a valid E.164 for your dial-plan in the H.323 Extension (E.164) field.
5 Change the Use Gatekeeper setting to Specify.
6 Enter the IP address of the gatekeeper in the Gatekeeper IP Address
field.
7 Click Update at the top of the page.
Once the gatekeeper address has been set, the unit will attempt to register to
the gatekeeper. You can verify successful registration with the
show
gatekeeper endpoints
command on the IOS Gatekeeper, see “Basic Cisco
IOS Gatekeeper Monitoring” on page 72. You should see your endpoint
registered with its E.164 ID, and an H.323 ID.
Kommentare zu diesen Handbüchern