Cisco uBR904 Bedienungsanleitung PDF herunterladen (Seite 3)

Release Notes for Cisco uBR904 Cable Access Router for Cisco IOS Release 11.3 NA 3

Headend Interoperability

To support data features sets that involve encryption/decryption, Cisco IOS images must contain

encryption/decryption software at both the CMTS and the Cisco uBR904. Both the CMTS router

and the Cisco uBR904 must be enabled and conﬁgured per the software feature set. Should you have

the Cisco uBR7200 series equipment, also reference applicable release notes for the corresponding

images at the headend that support the feature set.

Hardware Supported

There are no new hardware features supported by the Cisco uBR904 for Cisco IOS Release 11.3 NA.

Determining the Version of Your Cisco IOS Software Release

To determine the version of Cisco IOS software running on your Cisco uBR904 cable access router,

router>show version

Cisco Internetwork Operating System Software

IOS (tm) 904 Software (UBR904-y4-mz), Version 11.3(11)NA...

Upgrading to a New Software Release

For information about upgrading to a new software release, see Cisco IOS Software Release 11.3

Upgrade Paths and Packaging Simpliﬁcation product bulletin on CCO at:

Service & Support: Product Bulletins: Software

Under Cisco IOS 11.3, click Cisco IOS Software Release 11.3 Upgrade Paths (#703: 12/97).

This product bulletin does not contain information speciﬁc to Cisco IOS Release 11.3 NA, but

provides generic upgrade information that may apply to Cisco IOS Release 11.3 NA.

Feature Set Tables

The Cisco IOS software is packaged in feature sets consisting of software images—depending on

the platform. Each feature set contains a speciﬁc set of Cisco IOS features.

Table 2 Feature Sets Supported by the Cisco uBR904

Feature Set

Feature Set Matrix

Term Software Image Platforms

MCNS Base Basic

1 This feature is offered in the Basic feature set.

uBR900-y4-mz Cisco uBR904

MCNS Base with Privacy Basic, Baseline Privacy

2 This feature is offered in the encryption feature sets which consist of 56bit DES (k1) data encryption feature sets.

uBR900-k1y4-mz Cisco uBR904

1 2 3 4 5 6 7 8 ... 21 22

Keine Kommentare

Cisco uBR904 Bedienungsanleitung Seite 3