Cisco 7301 Technical Information PDF herunterladen (Seite 8)

4 Rack-Mount the Router

This section provides information for rack-mounting the router.

Attach the Rack-Mount Brackets—Chassis Front-Mounted

Figure 4 Attaching the Rack-Mount Brackets to the Front of the Chassis

Depending on how the rack-mount brackets are attached to the chassis, the chassis either protrudes from the rack or is recessed

in the rack.

Step 1 Locate the rack-mount and cable-management brackets and screws and a Number 2 Phillips screwdriver.

Step 2 Align the rack-mount bracket (1) to the side of the router. Depending on which set of rack-mount bracket holes you

choose to use to attach the rack-mount bracket to the router, the chassis will either be recessed in the rack or protrude

from the rack.

Step 3 Insert and tighten the two screws (2). Repeat Step 1 and Step 2 on the other side of the router.

Step 4 To install the cable-management bracket, see page 9. If you are not installing the cable-management bracket, skip to

the “Four-Post Rack Installation” section on page 10 or the “Two-Post Rack Installation” section on page 11 for

rack-mount instructions.

Rack-mount bracket

4 screws, 8-18 x .37 in., for use with a 19-inch rack

4 screws, 8 x .375 in., for use in a 21–23-inch rack

ALARM

RJ45 EN

LINK

TX RX

GBIC

GIGABIT ETHERNET 0/2

RJ45 EN

LINK

TX RX

GBIC

GIGABIT ETHERNET 0/0

RJ45 EN

LINK

TX RX

GBIC

GIGABIT ETHERNET 0/1

CISCO 7301

SLOT 1

CONSOLEAUX

COMPACT

FLASH

STATUS

100-240V, 2A, 50/60 Hz

24V

9A, 48 - 60V

ENABLED

RX CELLS

RX CARRIER

RX ALARM

ATM

80906

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 7301 Technical Information Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco 7301