Cisco 3620 Installationsanleitung PDF herunterladen (Seite 13)

Cisco 3600 Series Memory Upgrade Configuration Note 13

Removing DRAM SIMMs

Follow these steps to remove DRAM SIMMs:

Step 1 Find the DRAM SIMM sockets on the motherboard, as shown in Figure 4 or Figure 5.

Caution Handle SIMMs by the card edges only. SIMMs are ESD-sensitive components and can be

damaged by mishandling.

Step 2 Remove one SIMM at a time, beginning with the SIMM in bank 3. To lift the SIMM out

of its socket, pull the locking spring clips on both sides outward and tilt the SIMM toward

the right side of the chassis, free of the clips. (See Figure 7.)

Figure 7 Removing DRAM SIMMs

Step 3

Hold the SIMM by the edges with your thumb and index ﬁnger and lift it out of the socket.

Place the removed SIMM in an antistatic bag to protect it from ESD damage.

Step 4 Repeat Step 2 and Step 3 for each SIMM.

Installing DRAM SIMMs

Follow this procedure to install DRAM SIMMs:

Step 1 Find the DRAM SIMM sockets on the motherboard, as shown in Figure 4 or Figure 5.

Caution Handle SIMMs by the card edges only. SIMMs are ESD-sensitive components and can be

damaged by mishandling.

Step 2 Hold the SIMM with the polarization notch on the right, near the front of the chassis, and

the component side away from you, with the connector edge at the bottom. (See

Figure 6.)

2. Push the top of the

SIMM forward and down.

1. Pull the locking spring clips outward.

SIMM

polarization

notch

Top view

Front of chassis

H7038

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Cisco 3620 Installationsanleitung Seite 13